DIY Fixes for 3 Common Washing Machine Problems
Posted on: 10 December 2015
The washing machine is perhaps one of the most frequently used appliances in your home. However, different components within this appliance can begin to wear over time. This will result in signs that your washing machine is not functioning properly. It is important that you know how to troubleshoot these problems through these washing machine repair tips that you can perform on your own.
Noise
When your washing machine is in the middle of a wash or spin cycle, it is normal for it to make a bit of noise. There are newer models of washing machines that are specifically designed to have silent cycles, but some noise is often unavoidable. However, if you notice that your washing machine makes a lot of loud noise when on the spin cycle, there may be a bigger issue. Not only can your washing machine be overloaded, but it might not be level. This can be corrected by placing a piece of plywood underneath the washing machine to make it level. This should correct the noise issue.
No Power
If you notice that your washing machine will not start, it is important to begin diagnosing the problem by taking a look at the power cord. Once you have made sure that it is plugged in properly, you can then check to make sure that the circuit breaker has not tripped. It is also possible that there could be a kink in one of the water inlet hoses that is causing the washing machine to not start. This issue can be corrected by cleaning the water out of the inlet valve and straightening out the hose.
Draining Issue
Another common problem involving washing machines is the inability for the water to drain properly. If you notice that water is not draining from your washing machine, the drain hose might not be properly placed. The height of the drain hose needs to be high enough to allow the water to effectively drain. This means that you might have to make sure that the position of the drain hose is increased so that the drainage pipe does not become clogged over and over again. The pump pulley might also be faulty. If you notice that the pump pulley will not turn, it is time to replace it with a new one. This will often correct the draining issue.
These tips will hopefully put your washing machine in order. Contact local specialty companies if you have further issues.
Share